Courses Available

Learning and Assessment Resources

CPCCPD3021: Prepare existing coated surface for painting

General information for the learner
Try / Demo
Information for the learner - CPCCPD3021
Try / Demo
Plan and prepare
Review work instructions to prepare surfaces for painting.
Try / Demo
Plan all work to meet relevant requirements
Try / Demo
Safety signs & lockout tags
Try / Demo
Inspection of Work Sites
Try / Demo
Barricades
Try / Demo
Select & check tools and equipment
Try / Demo
Environmental management site plan
Try / Demo
PPE & Hazards
Asbestos Hazards
Try / Demo
Silica Dust Hazards
Try / Demo
Dust in the work environment
Try / Demo
PPE for painters
Try / Demo
RPE - Employer and Employee Obligations
Try / Demo
Respirator Selection
Try / Demo
Fitting the Respirator
Try / Demo
Safety issues regarding painting & decorating equipment
Try / Demo
Fillers used in painting & decorating
Try / Demo
Primers
Try / Demo
Testing paint adhesion
Try / Demo
Preparing metal surfaces
Try / Demo
Quality requirements relevant to preparing existing coated surface for painting
Try / Demo
Techniques for removing substrate and surface contaminates:
Removing mould
Try / Demo
Chemical strippers
Try / Demo
Repairing and Resolving Paint Defects in Existing Coatings
Try / Demo
Testing for dirt, oil contamination, & chalking
Try / Demo
Techniques for removing Grease, Chalking and Efflorescence
Try / Demo
Types, characteristics, uses and limitations of tools and equipment
Dropsheets
Try / Demo
Duster brushes
Try / Demo
Filling knives and blades
Try / Demo
Hammers
Try / Demo
Mechanical and hand sanding
Try / Demo
Common problems with mechanical sanding systems
Try / Demo
Nail punches
Try / Demo
Heat guns - ignite
Try / Demo
Low temperature heat processes
Try / Demo
Scrapers
Try / Demo
Pressure washers
Try / Demo
Brushes and wire brushes
Try / Demo
Clean up
House-keeping for painters
Try / Demo
Check & clean painting tools and equipment
Try / Demo
Storage and disposal of waste paint products
Try / Demo
Storing paints and solvents safely
Try / Demo
Practical Activities
Practical Task 1 - Prepare a coated external timber surface
No Preview
Practical Task 2 - Prepare a coated internal plaster surface
No Preview
Practical Task 3 - Prepare a coated internal timber surface
No Preview
Practical Task 4 - Prepare a coated metal surface
No Preview
Practical Task 5 - Prepare a coated masonry surface
No Preview
CPCCPD3021 Observation Checklist - Preparing coated surfaces for painting
No Preview
Apprentice Finalisation
Apprentice/Learner Declaration and Feedback
No Preview
Trainer Unit Completion Procedure
Trainer Sign-off 1 - Administrative/Compliance checks
No Preview